Mitchell Parade - Mollymook Beach - Stormwater Outlet

In 2018, Shoalhaven Coastal Zone Management Plan (CZMP) Risk Assessment (Advisian, 2018) identified wastewater infrastructure assets in Mollymook and Narrawallee exposed to 'high' or 'extreme' coastal hazard risk.

 
Mollymook storm water.jpg
 

About the project

Below: Stormwater outlet repair works at Mitchell Parade, Mollymook Beach, are completed.

Mitchell Parade.jpg Mitchell Pde Mollymook - Stormwater outlet repair - RCope - Jun23.JPG

Council upgraded the stormwater outlet at Mitchell Parade, Mollymook in May 2023 to address erosion and mitigate coastal hazard risks. The existing outlet was contributing to the erosion of the foreshore by creating a local weak point in the natural dune defence buffer against storm events. The upgraded infrastructure helps to provide a dune system that is more resilient to coastal erosion. Vegetation around the outlet will establish over time to stabilise the dune and will provide improved habitat for native flora and fauna species. Council is undertaking maintenance within this area to enhance success rate for these measures.

After a storm or other erosion event, the rock and sand filled bags next to the stormwater outlet may become temporarily exposed. This is expected and has been accounted for in the coastal engineering design.

Sand is expected to buildup and cover the structure overtime, during natural coastal beach sand returning to the beach, foreshore, after being completely covered with water (accretion cycles)

Background

In 2020, the services of a specialist coastal engineering consultant was engaged to determine the appropriate long term (end state) and interim (transitional) coastal protection options to reduce the exposure risks.

The investigation identified a strong need to mitigate immediate coastal hazard risk at the Sewerage Pump Station (SPS) opposite number 57 Mitchell Parade. One factor contributing to the erosion vulnerability at this location was the presence of a stormwater outlet which discharges onto the beach adjacent to the SPS. The process of sand scouring from the outlet discharge has formed a “disconnect” in the sand dune system. This resulted in a localised loss of natural dune protection in front of Mitchell Road and the SPS.

The investigation identified an appropriate ‘transitional’ coastal management option for protection of the SPS, stormwater outlet and adjacent Council road. This option comprises of the design and construction of a stormwater entrainment structure, to mitigate erosion hazards associated with the stormwater discharge on Mollymook beach. It will prevent meandering stormwater flows from the outlet adjacent to the SPS, which currently generates a wide zone of dune and beach erosion.

This work is intended to provide enhanced resilience of the local dune system to high-frequency storm events in the short-medium term and alleviate the erosion at what is currently a pinch point brought about by the stormwater outlet and the proximity to Mitchell Parade. The Detailed Design for the works are complete. Council aim to start the construction works in early 2023 (outside of peak public use periods). 

These works are being implemented as a transitional measure, providing required upgrades to existing stormwater infrastructure assets and to enable a level of protection against immediate risk of erosion hazards while longer term management actions for the broader localised area and nearby assets are being assessed. It is intended to provide a moderate level of protection for less severe storm events and increase potential for dune resilience and recovery after storm events.